среда, 19 июля 2017 г.

DIY Cedar Planter Box Shanty 2 Chic

DIY Cedar Planter Box - Shanty 2 Chic



Hey there! I love this project today! It’s super easy, requires minimal tools and it’s quick and cheap – doesn’t get any better right?


DIY-House-Number-Planter-Box_

DIY-Cedar-Planter-Box

Did I mention it’s versatile? So, here’s the story! We decided to have friends and family over for a cook out, this weekend. Being in a new house (you can check out my house building journey HERE), I have focused all of my time building furniture for the inside. Well, the outside was neglected and I wanted to do a little something to spruce it up before we had company over. I decided to build a few faux planter boxes out of cedar fence planks.


Each box was under $10 and you can easily customize the size! Here’s what I did!


measurement-for-smaller-box

measurements

I cut enough fence material to build 2 boxes. For the smaller box, I cut 4 2×3 fence posts at 16″ and 12 1×6 planks at 16″. For the larger one, I cut 4 2×3’s at 22″ and the 1×6 planks at 22″, as well. If you don’t have a saw, the one below is perfect for small projects like this!


glue-2x3's
I applied wood glue to 2 2×3’s (this is interior/exterior wood glue)!

nail-slats

I then used my

Ryobi Airstrike Nailer to attach the fence planks to the 2×3’s. I kept these flush with the ends of the 2×3’s. For the small planter I attached 3 planks and for the larger one, I attached 4 planks. Make 2 of these sides for each box.


wood-glue
Next, it was time to attach the sides. Flip them on the ends and apply more wood glue then follow up by nailing more fence planks, flip it around and add the final planks!

completed-box

Easy!!!


RustOleum-Spar-Varnish-1
I added 1-coat of Rust-Oleum Spar Varnish to the entire box, inside and out and then dropped a potted plant inside!

hinges
You can hunt the fence hardware isle at your local hardware store and find tons of decorative options if you like! I added these hinges to the large planter

add-numbers
And I chose to use our house address numbers on the smaller one! I used my Ryobi 18-Volt drill to attach them all!

I put the large box around a tree on our back patio


DIY-Cedar-Plank-Planter
and the smaller one out on our front porch!

DIY-House-Number-Planter-Box
This project took all of 30 minutes!

And…. I’ve added some printable plans for each box below to make it easier for ya! Click the images to print them for free


Thanks so much for stopping by!


~Ashley


Original article and pictures take http://www.shanty-2-chic.com/2014/05/diy-cedar-planter-box.html site


>

Комментариев нет:

Отправить комментарий