How to make wood frames! Step by Step! A girl and a glue gun

I even hopped on facebook live to show you step by step!

Okay, let’s head to Home Depot!

for the edges/frames: On an end cap is a pile of this wood. $1.07 each! Really cheap…and you can get about 2 whole frames (8 pieces) from each one!–sometimes more depending on size!

You will want to try the flattest piece of wood that looks smooth. Some of those small boards can be totally splintery and curvy!

For the main part of the frame:

I buy common board…WAYYY cheaper than the fancy wood! (and I’m cheap!) There is whole side of different sizes.

see the 1×4-6ft??

That means its 1 inch thick, 4 inches wide and 6 feet long.

and when I say 1 inch thick…it’s actually 3/4 and when i say 4..it’s really like 3 1/2. (something about when it’s sanded down or something!)

So I like 3 of the 4 inch boards

or 2 of the 6 inch boards

or 1 of the 12 inch boards.

(the wider– the more expensive and when you are trying to nail the three boards together it can be tricky!)

and you can make it as big or small as you want! This one is about 18 inches by 26 inches!

For a craft night I did 2 of the six inch boards–a square…11×11.

and I averaged each frame about $1.75! Pretty cheap for a cute craft!

I buy 6 feet long…because I can fit it in the back of my 4 runner. But they have 10 feet long boards!

If you buy one of the skinny boards for the frame and one 6 inch wide board…you are going to get a least two frames

(unless you go BIG!)

AND…did you know that Home Depot cuts wood for you? So if the cutting part scares you than take a measuring tape and pencil there and have them get ur done.

We have a chop saw–makes it nice and clean and fast…

But since I’m scared of the chop saw…I use my –It’s handheld and I use it cut everything! Just measure out and cut! (and wear safety glasses–no matter how unstylish they are!)

Cut your middle main boards however long you want. Then you are going to want to cut two of the skinny wood so it matches the height of the frame.

Keeping it all together you measure across the two pieces of wood you have cut and the inside piece to find the length and cut two more pieces for the top and bottom.

Keep in mind that these frames are meant to be “rustic” Which is why it’s not all fancy mitered corners. Some of the wood might not be super straight… It might not match up perfect…And THAT’s OKAY! Life is too short for that crap! After it’s all cut..I lay out to find the best sides and………..

paint or stain! (You can actually assemble before hand…but it’s so much easier to paint in pieces!)

Let’s talk STAIN! I love the look of stain. I thought I would share some of my favorite colors!

1. is (my favorite–Jacobean is a little darker and Espresso is a bit warmer)

3.

here is the gray…It’s very pretty!

and remember that each wood takes stain totally different!!!

And paint is always fun! Lots of colors…or patterns! So many options!

after it’s all painted…

Time to nail this baby together!

I used this…

It’s AMAZING! and loud. But it works so quickly! You can easily hammer in nails if you don’t have a brad nailer…but if you have a TON to do …this makes it go fast! (this is what happens when I ask husband to take a picture of me!)

I has to be pressed into the wood to shoot…which is awesome because I’m sure I would have shot myself in the foot or leg 12 times by now if it didn’t have this safety feature!

okay–The more boards in the frame…it’s a little more tricky and hard to hold in place. I start with the pieces of the frames that are flush–that way you can match up the larger piece exactly. For each piece of wood, it needs two nails.

If you do one nail the board can move while you are nailing in the other pieces and make it wonky!

If you find this tricky you can hot glue it to hold it in place while you are nailing!

you need to add a nail in each arrow. I do one side (the side of the frame that doesn’t overhang) flip. other side. Then top and bottom making sure it’s even!

See the blue arrows…? That is where you will need to add nails. It connects the frames together!

The nice thing about these frames is that it’s a rustic look. (aka…not perfect!) So you can just leave those nail holes! No need to putty!

When you are done the back should be totally flush….

So TECHNICALLY you could do something on both sides! (I couldn’t decide what background to do on my nutcracker so I made it two sides to see what photographed better (the things bloggers do!)

If you want to hang…I totally recommend these

After it’s all assembled is when I Distress it. Sand the edges of the frame.

Sometimes I add some brown to the light colors…

and Sometimes I don’t.

Now…my favorite part! DECORATION! so many options!!!

How about chalkboard??

Hot glue on some fun letters… Vinyl is so easy to add a fun saying! (go HERE)

and HERE

and here

This one is is floracraft foam and vinyl! (go HERE)

This one is made out of foam core board! (go HERE)

What about a wreath?

This pumpkin was from a store! Just hot glued it on!

glue on some paper flowers with a fun printable (Printable from HERE)

" or glue on wood flowers and hand paint some fun messages!

You can add a clip and make it so they can swap out pictures

If you want to learn how to use vinyl as stencil to get fun distressed signs go here

We had a craft night–and partnered up with Any way you cut it (my neighbor!!!)–she came up with 4 options and people bought what they wanted…(um..88 frames! wowza!)

Check out how colorful and unique each one is!

I also wanted to share Virginia from Fynes Designs....

She is QUEEN of these frames!

and if you are just wanting to buy some frames and not make your own…check out Salty Bison! They are alllll so cute!

Original article and pictures take http://www.agirlandagluegun.com/2015/12/how-to-make-wood-frames-step-by-step.html site


>