How to make a Plain Wood Board Look Rustic

{this post contains affliate links referencing products used}

How to make a Plain Wood Board Look Rustic

To make a Rustic Wood Sign, I first stain the board with a dark stain. I used too.

After the stain was dry, I applied a coat of Vaseline around the areas I wanted the stain to show through. Just apply the Vaseline with your fingers, smear it on the board not too thick but all around the areas you want the stain to show through. Remember, you can’t do this wrong!

Then, spray paint the whole board with makes a mess in my opinion.

After the spray paint is dry, wipe off the Vaseline’d areas with paper towel. The paint should chip off the board leaving the stained wood showing underneath. Now, use an electric sander to distress any other areas around the board you want to look old until you achieve that rustic, chippy look we all love!

There are lots of techniques on How to Make a Rustic Wood Signs but this is how I do it so, I hope it inspires you to give it a try too. Remember, you can’t do it wrong.. just do it! Click on the images below to see my Rustic Wood signs made with this technique.

Original article and pictures take http://www.ribbonsandglue.com/rustic-blessed-sign.html site


">