Attach 1x3 pine boards vertically to the wall with nails. The width between the boards depends on the look you"re going for, but I space the boards between 12-16" depending on the wall size.
Attach 1x4"s horizontally above the 1x3"s. To create a small box at the
Use a 1x2 pine board to mimic a ledge at the top of the 1x4. The ledge is optional, but it looks finished and gives an area to display some frames or artwork.
Add a small trim piece under the 1x2 ledge that was installed so it creates a seamless look.
Once all the boards are on the wall, paint the boards and the wall the same color. Hooks add useful space and look nice too!
What a difference a couple boards on a wall can make! The compliments will come rolling in if you try board & batten somewhere in your home! Check out my blog for the full tutorial!
#wainscotting#boardbatten#Entryway#walltreatment
To see more: http://www.mommystoolbelt.com/entryway-transfo…ith-board-batten
Original article and pictures take http://www.hometalk.com/23407800/entryway-board-batten site
">
Комментариев нет:
Отправить комментарий