суббота, 9 июня 2018 г.

Poisoned Apple

Poisoned Apple

Poisoned Apple


The Poisoned Apple is an iconic symbol from the classic fairytale from the Brothers Grimm. I turned this one on a lathe, and dyed it red with Transfast wood dye. To add an extra element of spooky, I used a Lichtenberg figure wood burner to burn lines in it. It"s 4" tall and 3 1/2" in diameter, and made out of Maple.


Tools and Supplies used:


Lathe


Bandsaw


Lichtenberg burner http://www.conestogaworks.com/


Step 1: Wood Choice


Wood Choice

I picked out a piece of Maple 4" x 5 1/2" with a bark enclosure to simulate a bite mark for the apple. I think picking the right piece of wood can really make the project sometimes.


Shaping the apple

Apple 4.bmp

Apple 5.bmp

Apple 6.bmp

Apple 7.bmp
Show All Items

I marked center on the wood, and put it between centers on the lathe. Use a roughing gouge to true the piece up, and a bowl gouge to shape the apple. I used a Easy rougher to put a tenon on one end, this will be used to remount the piece in the chuck for sanding and parting off.


Lichtenburg Burning

Apple 10.bmp

Lichtenberg figures are branching tree-like patterns that are created by the passage of a high voltage discharge along the surface. I really wanted to give it that bad apple look :) Here"s a link to how this LICHTENBERG FIGURE WOOD BURNER works. Video


Safety notice: The output voltage and current (12,000 volts

@ 35 mA) from this burner can cause serious burn, injury, or death if these instructions and safety precautions are not followed. The safe use of this burner is entirely the responsibility of the purchaser.

If you have any electronic implant, consult your doctor before using. If you do not agree with this, do not use it and immediately return the burner for a full refund.


With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.


Making the Stem

Dye

Apple 16.bmp

I put on three coats of Transfast scarlet red wood dye with a paint brush. Let each coat dry for about an hour before reapplying.


Finish

Apple 19.bmp

After burning and the dye, it really opened up the grain so it took about 15 coats to get it to shine. I used a gloss lacquer finish.


I hope you enjoyed this project.


Original article and pictures take http://www.instructables.com/id/Poisoned-Apple/ site


>

Комментариев нет:

Отправить комментарий